Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Trail II Pedal
$105.00 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Wheels Manufacturing Inc. Pedal Washers
$10.75 - $19.95
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
Sunlite ATB Pedals
$12.99
- Plastic nylon molded body - Chromoly spindle - 318g pair
Sunlite Classic Block Pedals
$15.99
- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair
Sunlite Cruz Sport Pedals
$29.99
- Polished one-piece alloy body - Boron spindle - Toe clip compatible - Approximately 450g pair
Shimano SPD-SL Cleat Set
$31.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11
Odyssey Grandstand Aluminum Pedals
$34.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, and a wider, dual-concave platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach - 9/16"
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Odyssey Twisted Pro Pedals
$16.99 - $22.99
While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height, and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversize pins per side - Traditional loose ball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - 9/16-inch spindle - 104mm Width - 98mm Length - 14.6 oz (pair)
LOOK Delta Cleats
$24.99
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g
LOOK Geo Trekking
$85.00
Simple, yet highly efficient. The GEO TREKKING PEDAL is LOOK's two-sided commuter option, allowing you to choose between a ride to work or a quick training session. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite - Traction: Composite studs - Spindle: Chromoly+ - Platform width: 84mm - Weight (pedal): 203g - Weight (pair + cleats): 461g
LOOK Keo 2 Max
$114.99
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g
LOOK Keo Classic 3
$65.00
Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g
Giant Plastic Juvenile Pedals
$7.50 - $8.99
Make sure your young rider is pedaling right with Giant's Plastic Juvenile Pedals. - 1/2-inch spindles
Giant Plastic Toe Clips and Straps
$11.00
Giant's Plastic Toe Clips and Straps feature durable and rustproof nylon clips and strong nylon straps with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
Dimension Junior Pedals
$9.99
Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)
Dimension Mountain Basic Heavy-Duty Pedals
$14.99
Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g
Dimension Pro Toe Straps
$10.95
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
Deity Components Bladerunner
$143.99
Our lightest and thinnest pedal to date, the BLADERUNNER pedal has become synonymous with peak performance and endurance. The perfect platform pedal for any application, this super-minimized design is 11mm thin with a platform large enough for incredible stability. It thrives in the most technically challenging conditions possible. When ground clearance is a priority, you will be hard pressed to find a pedal more suitable for rocky terrain. We've left no detail unrefined with this masterpiece – down to the additional pin kit included with purchase and load-distribution system to prevent bearing blowout from side impact – these pedals are yet another DEITY design that sets the bar for excellence. - Extruded and machined from 6061 T6 aluminum using Deity dies - Thin 11mm profile at the exterior edges - 103mm x 100mm footprint - Concave pin profile - Load-distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - 10 allen bolt pins per side keep your feet glued - Machined traction grooves - Minimal material in key areas to shed weight and mud build-up - Stepped black polished Cr-Mo axle is compatible with 8mm allen keys or also a standard 15mm pedal wrench - Fully serviceable without requiring removal from the bike - Rebuild kits available - Pedals come with an extra set of pins for backups - Weight: 370 grams (pair)
Deity Components Deftrap
$54.99
With the addition of the DEFTRAP pedal, we sought to revolutionize the expectations for nylon composite pedals. Built around a true concave profile, the top-tier nylon and glass fiber composite material creates a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, and the ability to skim over rocks all offered in 10 colors, the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market. - All-new pedal design inspired by the world-renowned TMAC pedal - Injection molded nylon fiber composite body - Premium nylon glass fiber composite material is 28% stronger than nylon composite used by most leading brands - Nylon glass fiber blend does not get hung up on rocks - Non-offset symmetrical design gives the rider perfect weight distribution across the pedal, creating a very stable platform through rough terrain. - Large 113mm L x 103mm W footprint - True concave pedal body profile - 1.5mm of concave shape in the pedal body (per side) - 18mm thick at the center - Best-in-class 10 pins per side (8 replaceable steel pins, and 2 fixed nylon pins) - 2 sealed bearings with oversized DU bushing design is robust and reliable - Open channeling for optimized mud and snow shedding capabilities - Not the average plastic disposable pedal...the DEFTRAP Pedals are fully sealed, rebuildable, thin, and offer the same or better grip in comparison to a traditional aluminum pedal - Brilliant design for all types of riding (Trail, Enduro, Downhill, Dirt Jumping, Commuting) - 391 grams per pair
Crank Brothers Premium MTB Cleats
$24.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
iSSi Cleat Set
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
iSSi Road Cartridge Spindle Rebuild Kit
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
iSSi Spindle Rebuild Kit
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
iSSi Thump Replaceable Pin Kit
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Xpedo CXR Pedals
$109.00
The CXR is the ultimate performance cyclocross pedal for riders looking for lightweight, durability, and strength. The Posi-Lock retention system allows superior adjustability and easy rapid engagement action. Specially designed larger front retention claw maximizes positive entry in wet and muddy conditions. Cromoly spindles are paired with three precision cartridge bearings for minimal maintenance. - Weight: 295g  - Body: 6061 Forged Aluminum - Spindle: Cromoly  - Bearings: 3 Cartridge  - Springs: SWP  - Cleat: XPEDO XPT (6° Float) 
Xpedo Spry Pedals
$79.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Wheels Manufacturing Inc. Pedal Washer
$3.50
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement
VP Components VP-ARC6 Split Cleats
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
Page 1 of 6 Next page