Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

RockShox Maxle Lite Through-Axle
$55.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
Delta Stem Raiser
$36.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
KMC MissingLink Connector
$1.20 - $1.98
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Problem Solvers ReMatch Adapter 1.1
$40.00 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
Problem Solvers Quick-Release Nut Light Mount
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
SRAM PowerLock Chain Connector
$4.49
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Wheels Manufacturing Inc. Chainstay Protector - Wide
$7.95
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Problem Solvers I-Spec II Shifter Clamp
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
Problem Solvers Micro-Adjustable Headset Spacer
$24.99
The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.
Problem Solvers 1-inch Headset Spacers
$4.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
Problem Solvers 1-1/8-inch Headset Spacers
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Problem Solvers Tapered Headset Stack Spacer
$20.00
For riders who appreciate an elegant and streamlined setup, the Stem to Top Cap Tapered Spacer features a slight taper toward the top, allowing it to transition seamlessly to the Top Cap. - Anodized aluminum construction, no logos - Sold in packs of ten - 4mm outer diameter at base tapers to 32.5mm outer diameter at the top - S.H.I.S. Stem Clamp Diameter: 28.6
CeramicSpeed 6000 Bearing
$106.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 10mm - Outer Diameter: 26mm - Width: 8mm
Wolf Tooth Components Seatpost Clamp
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key
Problem Solvers Singlespeed Cassette Cog Carrier
$14.99 - $24.99
Problem Solvers' Cassette Cog Carrier (CCC) bolts on to a splineless single-speed cog to give you a wide, Shimano-splined cog to run on your freehub body. The wide profile won't damage your freehub body. Tech Details: Aluminum carrier with steel cogs
Dimension Seatpost Clamp
$17.99
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
Paul Component Engineering Track Lock Ring
$37.00
- Machined stainless steel lock ring, extra wide to prevent stripping - Stepped inner edge to tighten even narrow cogs (minimum size 13t) - Made in USA
DVO IGUS Bushing Rear Shock Mount Hardware Kit
$10.00
A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)
DVO ProRate Rear Shock Spring
$130.00
The ProRate Spring is designed to fit both Jade and Jade X rear shock models, offering the longest spring life of any lightweight steel spring on the market. - Up to 125lbs. of progressive rate coil; great for big-hit support, aggressive riders, or linear linkage designs - Lightweight and high-quality Japanese steel - Retains spring-rate up to 1,000,000 compressions
Giant Defy/Avail Advanced Seatpost Clamp
$13.00
-Seatpost clamp for Defy/Avail Advanced models (2015-2016)
Salsa Flip-Lock
$29.99 - $35.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
Sunlite Derailleur Hanger
$19.99 - $26.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Wippermann Chain Connectors
$5.95 - $13.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
FSA Headset Compression Plug
$11.99 - $12.99
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
Origin8 Keyed Lock Washer
$7.99
Threaded headset keyed locknut washer - Bag of 10
FSA Quick Release Chain Link
$28.99
A Quick Release Chain Link might have the greatest value-to-weight ratio of any Item in your toolkit. Keeping some stashed on every bike and in every kit is a no-brainer. FSA has you covered with 8-packs to cover your needs.
Problem Solvers Cross Clamp
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
Profile Design Sonic Bracket Kit
$91.00
The forged aluminum bracket offers solid, easy-to-use construction alongside an industry-leading fit range. It is also compatible with our riser kits. The bracket is designed for 31.8mm bars and 22.2mm extensions in aluminum or carbon. - Materials: Forged 6061-T6 AL - Stack Height: 42.6mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 234g
Origin8 Braze-On Front Derailleur Adapter
$14.49
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
Origin8 Chain Deflector
$6.79
- Anti chain-suck device - Allows the front derailleur to be adjusted for strong downshifts - If not using front derailleur the device can act as a chain guide
Profile Design 35a Aluminum Extensions
$51.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35a is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 340mm or 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
KMC Missing Link 11-DLC
$20.00
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs
Race Face Aeffect Crank Stopper Kit
$6.00
Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.
RockShox XLoc Sprint Remote
$124.00
This hydraulic lockout offers completely sealed and dependable suspension fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
Zipp Bearing Kit: For 2009-Current 88/188 Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs
Zipp CeramicSpeed Bearing Kit: Modified For 177 Rear Hub
$276.00
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Wheels Manufacturing Inc. Derailleur Hanger 17
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-17 measures 15.49mm between the 2 mounting holes (center to center) and 4.7mm between the 2 vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 115
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screw
Wheels Manufacturing Inc. M8 Derailleur Hanger Bolt
$2.95
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
FSA QR-21 ME Self-Extracting Crank Bolts
$10.00
- Self Extracting crank bolt Suitable for: - Road: Powerbox alloy, Powerbox Supercompact alloy, Energy, Gossamer cranksets - Off-road: Powerbox alloy, KFX, Gradient cranksets
FSA Aluminum Headset Stack Spacers
$12.99 - $14.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.
TRP FM to PM Adapters
$15.99
Adapters to convert your flat mount frame or fork to post mount. - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor
SRAM Flat Mount Disc Caliper Bracket Bolts
$6.00 - $24.00
Flat Mount Disc Caliper Bracket Bolts
Thomson Seatpost Collar
$29.99
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Specialized Ohlins 7.75-Inch Stumpy Spring
$36.95 - $95.00 $95.00 Up to 61% Off
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.
Specialized Ohlins 9.5-Inch Demo Light Spring
$95.00
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
Specialized Ohlins 8.25-Inch Enduro Light Spring
$36.95 - $95.00 $95.00 Up to 61% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
Wheels Manufacturing Inc. Derailleur Hanger 301
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 socket head screw included - Replaces Specialized Amazinger 2.0 (S16260002) and Amazinger 2.1 (S172600003) Hanger
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch
$5.25 - $10.50
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Ritchey WCS Carbon 1-Bolt Seatpost Clamp
$13.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Carbon 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt carbon seatpost - Material: 7050 alloy
PNW Components Loam Lever Dropper Post Lever Kit
$69.00 - $79.00
Dropper post levers are something a lot of us overlook—we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, we decided we could do better. So we made the Loam Lever. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The lever's grippy, injection-molded pad has got your back in sloppy weather conditions. And, speaking of weather, we made sure the whole thing was as weatherproof as possible, meaning your lever won't squeak, bind up, or fail after being in the rain. The Loam Lever Has 5 Key Characteristics: 1. Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial-in your perfect placement.  2. Weather Proof - Oversized high-quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability. 3. No-Slip Grip - Speaking of weather, the Loam Lever features a grippy, injection-molded thumb pad so you can drop or raise at the right time in even the sloppiest of conditions. 4. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction. 5. Direct Mount - Available in SRAM's MatchMaker X for Guide brakes and Shimano's I-Spec II for XTR M9000, XT M8000, SLX M7000, and DEORE M6046
Giant Connect SL Ski-Bend Carbon Aerobar Extensions
$122.00
Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
Surly Thru Axle
$30.00
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy
Surly Stainless Seatpost Clamp
$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
Surly Chainring Guard
$45.00
Single chainring drive train setups are all the rage these days. With the introduction of exceedingly wide range 10- and 11-speed cassettes, the need for two chainrings has become a thing of the past. But when you only have one chainring, the only thing standing between you and a long walk back to the trailhead is you making sure you don't destroy your one chainring. That's why Surly made a chainring guard to fit O.D. cranks. It is made of aluminum and will take the hit for your chainring. It comes in 5 bolt, 94mm BCD and was designed to protect 22t – 30t rings.
Giant Face Plate Spacer—Conduct Brake
$30.50
- Face plate spacer for Conduct brake. - Longer bolts included.
Giant EnergyPak Connector Cover—Side Release
$12.75
- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak
Surly Tuggnut/Hurdy/Snuggnut QR Adaptor Washer
$3.00
- QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut
Surly Mr. Whirly Spindle
$57.50
Surly Mr. Whirly Spindles. - 100% CroMoly steel - Proprietary dimensions and spline for use only with Surly Mr. Whirly cranks
Page 1 of 15 Next page